Unnamed Run (1764) is a 3.8 mile stream, with the associated WBID(s): 1764.
This waterbody is located within: Peace River Basin
View Maps / Data
CHNEP's Comprehensive Conservation and Management Plan (CCMP) identified four action plans: water quality improvement; hydrological restoration; fish, wildlife, and habitat improvement; and public engagement. Click on the interactive maps below to view data associated with these goals and actions.
Water Quality
Hydrology
Wildlife/Habitats
Resiliency/Weather
Water Quality Snapshot
The Water Quality Snapshot compares the most current water quality data to applicable water quality standards for Chlorophyll a, Phosphorus, Nitrogen, Bacteria, and Dissolved Oxygen to provide a snapshot of how a waterbody is doing. Water quality standards are outlined in Florida Administrative Code 62-302 for fresh/marine waterbodies of different types and uses. A Water Body Identification number (WBID) is an assessment unit that is intended to represent Florida’s waterbodies at the watershed or sub-watershed scale. The assessment units are drainage basins, lakes, lake drainage areas, springs, rivers and streams, segments of rivers and streams, coastal, bay and estuarine waters in Florida.
Showing water quality snapshots for 1 out of 1 WBIDs.
Loading...
1764 - UNNAMED RUN
(percent (%))
(µg/L)
(mg/L)
(mg/L)
(cfu/100mL)
View Detailed Data About the Following Topics:
Water Quality
Water Quality Index
Water Quality Index (WQI) is an average of 5 different parameters giving a river a (0-45), (45-60), or (60+) rating. Learn more about the Water Quality Index »
No Data Available
Nutrient Chemistry
Although naturally present in all surface waters, excessive nutrients – nitrogen and phosphorus – are a nationwide water quality problem. They can cause overgrowth of plants that deplete the oxygen in the water needed by aquatic creatures to survive. Learn more about nutrient chemistry »
| Parameter | Latest Value | Historic Range |
|---|---|---|
| Nitrogen, Total | 1 mg/L 7/31/2018 Source: FDEP Watershed Monitoring Section | 1 - 1 mg/L 7/31/2018 - 7/31/2018 1 samples |
| Phosphorus as P | 0.48 mg/L 7/31/2018 Source: FDEP Watershed Monitoring Section | 0.48 - 0.48 mg/L 7/31/2018 - 7/31/2018 1 samples |
| Chlorophyll a, uncorrected for pheophytin | 35 µg/L 7/31/2018 Source: FDEP Watershed Monitoring Section | 35 - 35 µg/L 7/31/2018 - 7/31/2018 1 samples |
| Chlorophyll a, corrected for pheophytin | 30 µg/L 7/31/2018 Source: FDEP Watershed Monitoring Section | 30 - 30 µg/L 7/31/2018 - 7/31/2018 1 samples |
Water Clarity
Water clarity or turbidity measurements show the degree to which light is blocked by suspended particles such as sediment or algae. In a healthy aquatic system, sunlight is able to penetrate the water column and is available for photosynthetic plants and the creatures that depend on them. Learn more about water clarity »
| Parameter | Latest Value | Historic Range |
|---|---|---|
| Secchi disk depth | 1.31 ft. 7/31/2018 Source: FDEP Watershed Monitoring Section | 1.31 - 1.31 ft. 7/31/2018 - 7/31/2018 1 samples |
| Turbidity | 4.7 NTU 7/31/2018 Source: FDEP Watershed Monitoring Section | 4.7 - 4.7 NTU 7/31/2018 - 7/31/2018 1 samples |
Salinity
Salinity is a measure of the amount of salts dissolved in water. An estuary can exhibit a change in salinity throughout its length as fresh water entering from the tributaries mixes with seawater from the ocean. Learn more about salinity »
No Data Available
Bacteria
Bacterial indicators for recreational waters include Fecal Coliform, Total Coliform, and Enterococcus (including E. coli). While indicator organisms themselves are not necessarily pathogenic, their presence suggests possible contamination which may result in human illness. Sources of this contamination include stormwater runoff, sewage overflows, and feces from wild and domestic animals. Learn more about bacteria »
| Parameter | Latest Value | Historic Range |
|---|---|---|
| Enterococcus Group Bacteria | 319.4 cfu/100mL 7/31/2018 Source: FDEP Watershed Monitoring Section | 319.4 - 319.4 cfu/100mL 7/31/2018 - 7/31/2018 1 samples |
| Escherichia coli | 119.5 cfu/100mL 7/31/2018 Source: FDEP Watershed Monitoring Section | 119.5 - 119.5 cfu/100mL 7/31/2018 - 7/31/2018 1 samples |
Dissolved Oxygen
Dissolved Oxygen (DO) is one of the most important indicators of water quality. It is essential for a healthy, productive biological system and vital to the survival of fish and other aquatic organisms. Learn more about dissolved oxygen »
| Parameter | Latest Value | Historic Range |
|---|---|---|
| Dissolved Oxygen (DO) | 4.25 mg/L 7/31/2018 Source: FDEP Watershed Monitoring Section | 4.25 - 4.25 mg/L 7/31/2018 - 7/31/2018 1 samples |
Impaired Waters
This waterbody has insufficient data according to the Florida Dept. of Environmental Protection's (FDEP) implementation of the Impaired Waters Rule (IWR). The FDEP evaluates whether waters meet their designated uses, which include aquatic life use support, primary contact and recreation use support, fish and shellfish consumption use support, and drinking water use support. Learn more about IWR Assessment »
Impairment Status
Insufficient Data
Florida also has mercury impairment statewide, its largest source being atmospheric deposition from local and global power generation. The Florida Department of Health (DOH) and Florida Department of Environmental Protection have identified over 400 waterbodies, most freshwater lakes and rivers but also some coastal/marine areas, that are impaired due to mercury found in fish tissue. Florida Fish Consumption Advisories, updated annually by the DOH, provide guidance on how to limit mercury exposure from these waters.
Water Levels & Flows
Hydrologic data describe physical properties of water such as how fast it is moving and how deep it is. Click the Learn More links to explore the significance of each parameter and how it is measured.
Water Levels
Water levels in Florida are seasonal, with higher levels during the state’s rainy summer and fall months. Recent water level data are shown below, along with historical and regulatory values to provide context. Learn more about river water levels »
No Data Available
Stream Levels and Flows
Stream level and flow data. Learn more about stream flows »
No Data Available
Bathymetric Maps and Depth Information
These are the latest available contour maps of the river section's bottom. These maps are used to determine the volume of river section which can be useful in calculating flow volume and for determining where deep and shallow spots exist in a section of the river as well as to see the channel of the river. Learn more about bathymetric maps »
No Data Available
Recreation
Find maps and waterway navigation guides, descriptions of facilities and recreational amenities, as well as warnings and restrictions pertaining to their use.
PHOTOS
2 Year Graph
10 Year Graph
Seasonal Variation Graph
Graph Details and Help
Water quality data is displayed as a scatter-plot with data from individual sampling events displayed by date, for the previous two- and ten-year periods. Data from all available sources are plotted together. Clicking on a graph will open a larger version of it. To view/download data older than ten years, or to view/download data from individual data source(s), click the "Download Data" icon or button.
The scale used is chosen to accommodate typical values for the water quality parameter being graphed. Units are shown on the y-axis and in the graph title.
Graphs are generated and stored in the Water Atlas database on a periodic basis using an automated process. The date when the graph was created is shown.
The Seasonal Variation Graph displays a statistical summary of data from all available data sources for the entire period of record. It is used to illustrate typical variation in the selected water quality parameter from month to month during the year. The diagram below shows how to read the graph:
The median value is shown. Although not specifically marked on the graph, the mean (average) value is midway between the 25th and 75th percentiles.
The "whiskers" indicate the range of the sample values; those that are outside pre-defined "Minimum" and "Maximum" values are excluded. Sample data less than the Minimum or greater than the Maximum are considered to be outliers and are not displayed on the graph.